STLINK-V3SET, modular debugger / programmer for STM32 / STM8
€74.96*
Currently out of stock
A confirmed delivery date is not currently available. Please ask us to check current availability.
Product information "STLINK-V3SET, modular debugger / programmer for STM32 / STM8"
Kurzbeschreibung: STLINK-V3SET, modular in-circuit debugger and programmer for STM32/STM8, JTAG / SWD, SWIM, Multi-path bridge USB to SPI/UART/I2C/CAN/GPIOs
Suitable for STM8 / STM32 microcontrollers
The STLINK-V3SET is a modular stand-alone debugging and programming probe for the STM8 and STM32 microcontrollers. The SWIM and JTAG/SWD interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
- Stand-alone probe with modular extensions
- Self-powered through a Micro-B USB connector (does not provide power supply to the target application)
- USB 2.0 high-speed compatible interface
- Direct firmware update (DFU) support, to use with more future devices
- Supports JTAG / SWD interfaces, 3V~3.6V application voltage support and 5 V tolerant inputs
- Supports SWIM interface, 1.65V~5.5V application voltage support, only available with adapter board MB1440
- Virtual COM port (VCP) specific features:
- 3 V to 3.6 V application voltage support on the UART interface and 5 V tolerant inputs
- VCP frequency up to 15 MHz
- Available on STDC14 debug connector (not available on MIPI10)
- Drag-and-drop Flash programming
- Two color LEDs: communication, power
All STM32 MCUs with JTAG / SWD interface
All STM8 MCUs with SWIM interface
- for reference only, the STM32 and STM8 boards above are NOT included
- JP4 and JP6 jumper caps must be connected to use the SWIM interface
| Item | V3MINIE | V3SET | V2 |
|---|---|---|---|
| JTAG/SWD application voltage | 1.65V~3.6V① | 3V~3.6V | 1.65V~3.6V① |
| SWIM application voltage | N/A | 1.65V~5.5V | 1.65V~5.5V |
| SWV support | YES② | ||
| Debug interface | multi | multi③ | 2 |
| LED Indicator | two colors④ | ||
| ① ST-LINK/V2 and STLINK-V3MINIE support STM32 low-power devices. ② Only available for STM32 at present. ③ STLINK-V3SET features GPIO port besides the programming port. ④ Two colors LED indicates both power and communication. | |||
- Micro USB port
- Power LED indicator
- COM LED indicator COM LED is blinking RED: the first USB enumeration with the PC is taking place. COM LED is RED: communication between STLINK-V3SET and the PC is established (end of enumeration). COM LED is blinking GREEN/RED: data are being exchanged between the target and the PC.
- UART header (VCP)
- SWIM header
- SWD header
- SWIM ON/OFF enabled when jumper cap is connected
- CAN header
- CAN ON/OFF enabled when jumper cap is connected
- UART Bridge
- SPI/UART/I2C/CAN/GPIOs Bridge
- SPI Bridge
- JTAG20 header
- STDC14 header
Lieferumfang
STLINK-V3SET x1
Login