Stepper Motor HAT for Raspberry Pi, Drives Two Stepper Motors
€22.60*
Currently out of stock
A confirmed delivery date is not currently available. Please ask us to check current availability.
Product information "Stepper Motor HAT for Raspberry Pi, Drives Two Stepper Motors"
Drives Two Stepper Motors, up to 1/32 Microstepping
For 3D Printer, Sculpturing machine, Mechanical arm...
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Onboard dual DRV8825 motor controller IC with built-in microstepping indexer, drives two stepper motors, easy to use
- 6 available microstepping modes, configured with the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable motor drive current via potentiometer, maximum 2.5A current output
- Protection features: Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO)
- Integrates 5V regulator, allows providing power to Raspberry Pi
- Onboard multi connector options for stepper motors in different specifications
- Comes with development resources and manual (examples in BCM2835, wiringPi, and python)
| Motor controller | DRV8825 | Logic voltage | 3.3V |
|---|---|---|---|
| Motor drive voltage | 8.2V~28V | Dimension | 65 × 56mm |
| Motor drive current | 2.5A | Mounting hole size | 3.0mm |
| Applicable motors | SM24240,5V Step Motor (NOT included) | ||
Designed for Raspberry Pi boards / Jetson Nano
Built-in converter for easy control, can drive two stepper motors
Configured via the DIP switches: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
| MODE2 | MODE1 | MODE0 | Motor Microstepping Setting |
|---|---|---|---|
| 0 | 0 | 0 | full-step |
| 0 | 0 | 1 | half-step |
| 0 | 1 | 0 | 1/4-step |
| 0 | 1 | 1 | 1/8-step |
| 1 | 0 | 0 | 1/16-step |
| 1 | 0 | 1 | 1/32-step |
| 1 | 1 | 0 | 1/32-step |
| 1 | 1 | 1 | 1/32-step |
Easy access to stepper motors in different specifications
| Pin | Motor Interface Description |
|---|---|
| VIN | 8.2~28V Power Input |
| 5V | 5V Power |
| GND | Ground |
| A1 | Output 1 terminal of bipolar stepper motor M1 winding A |
| A2 | Output 2 terminal of bipolar stepper motor M1 winding A |
| B1 | Output 1 erminal of bipolar stepper motor M1 winding B |
| B2 | Output 2 terminal of bipolar stepper motor M1 winding B |
| A3 | Output 1 terminal of bipolar stepper motor M2 winding A |
| A4 | Output 2 terminal of bipolar stepper motor M2 winding A |
| B3 | Output 1 terminal of bipolar stepper motor M2 winding B |
| B4 | Output 2 terminal of bipolar stepper motor M2 winding B |
Easy access to stepper motors in different specifications
- Raspberry Pi GPIO interface Can be connected to various Raspberry Pi HATs
- Motor interface Three different specifications of the motor interface, easy to use
- MP1482 power chip External power supply can be converted into 5V voltage to power the Raspberry Pi
- DRV8825 motor driver chip Can drive two stepper motors
- External power supply interface 8.2V ~ 28V DC power input
- Motor power switch You can choose whether the module supplies power to the Raspberry Pi
- DIP switch For setting 6 different step resolutions
- Potentiometer Adjustable motor drive current
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Lieferumfang
Note: Raspberry Pi and stepper motors in the photos are NOT included.
- Stepper Motor HAT x1
- RPi screws pack (2pcs) x1
Login