Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4
€21.41*
Currently out of stock
A confirmed delivery date is not currently available. Please ask us to check current availability.
Ask about delivery date
A confirmed delivery date is not currently available. Please ask us to check current availability.
Product number:
WSAL21726
Product information "Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size as the CM4"
Kurzbeschreibung: Nano Base Board (B) For Raspberry Pi Compute Module 4, Same Size As The CM4
Nano Base Board (B) for Raspberry Pi Compute Module 4, Same Size As The CM4
Nano Base Board (B) for CM4
Suitable For Evaluating The Raspberry Pi CM4 Or Being Integrated Into End Products
Base Board for Compute Module 4 Lite/eMMC
Compact, Yet Complete
Standard CM4 Socket, 40PIN GPIO, Gigabit Ethernet, USB2.0, DSI, CSI, 3.5mm audio jack...all in the compact body just as the size of CM4
Note: the CM4 is NOT included. Please buy it separately if necessary.
Specifications
| CM4 socket | suitable for all variants of Compute Module 4 |
|---|---|
| Networking | Gigabit Ethernet RJ45 connector |
| Connector | Raspberry Pi 40PIN GPIO header × 1 |
| USB | USB 2.0 Type A connector × 1 |
| Display | MIPI DSI port × 1 (15pin 1.0mm FPC connector) |
| Camera | MIPI CSI-2 port × 1 (15pin 1.0mm FPC connector) |
| Video | Mini HDMI port × 1, supports 4K 30fps output |
| Audio | 3.5mm jack |
| Storage | Micro SD card socket for Compute Module 4 Lite (without eMMC) variants |
| Power input | 5V |
| Dimensions | 56 × 41mm |
What's On Board
- CM4 socket suitable for all variants of Compute Module 4
- Micro SD card slotfor connecting a Micro SD card with pre-burnt image (Lite variant ONLY)
- 40PIN GPIO headerfor connecting sorts of HATs
- Gigabit Ethernet RJ45 connector
- Power supply / Programming5V power supply, or used for eMMC burning
- 3.5mm audio jack
- User button
- USB2.0 connectorfor connecting sorts of USB devices
- CSI connector MIPI CSI camera interface
- DSI connector MIPI DSI display interface
- MP1658
- Mini HDMI connector supports 4K 30fps output
- BOOT switch ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)
Outline dimensions
Resources & Services
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
What's the differences
| CM4 Base Board | Interface count and specifications | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PoE | Gigabit ETH | 40PIN GPIO | PCIe | USB① | DSI | HDMI | CSI | RTC | Fan Header | Power Input | Features | |
 NANO A | √ | 2.0×1 | ×1 | 5V | CM4 sized | |||||||
 NANO B | ×1 | √ | 2.0×1 | ×1 | ×1 | ×1 | 5V | CM4 sized | ||||
 NANO C | √ | 2.0×1 | ×1 | ×1 | ×1 | 5V | Onboard Camera | |||||
 mini Base A | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | 5V | 5V | mini size | ||
| mini Base B | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | √ | 5V | 5V | mini size | |
 mini Base C | ×1 | √ | M.2 M | 2.0×2 | ×1 | ×2 | √ | 5V | 5V | Dedicated 40PIN LCD Connector | ||
 Touch screen | ×1 | M.2 M | 2.0×4 | ×1 | ×1 | 5V | IPS screen | |||||
 Mini Dual Gigabit | ×2 | √ | 2.0×1 | 5V SH1.0 | 5V | dual ETH | ||||||
 Binocular camera | ×1 | √ | M.2 M | 2.0×4 | ×2 | 5V | dual 8MP cameras | |||||
 4CH RS485 | ×1 | 2.0×2 | ×1 | ×2 | ×1 | 5V | 7-36V | dual ETH | ||||
 WIFI6 DUAL ETH | ×1 | √ | M.2 E | 2.0×3 | ×1 | ×2 | ×2 | ×1 | 5/12V | 7-36V | WIFI6 dual ETH | |
 Dual Gigabit ETH | ×2 | √ | 3.0×3 | ×1 | ×2 | ×2 | √ | 5/12V | 7-36V | |||
 IoT Dual Gigabit ETH | ×2 | √ | 3.0×2 | ×1 | ×2 | ×2 | √ | 5/12V | 5V | 5G/4G support | ||
 IoT Base | √ | ×1 | Gen2×1 | 2.0×2 | ×2 | ×2 | ×2 | √ | 5/12V | 7-36V | 5G/4G supportRS232RS485ADC | |
 PoE Base (B) | √ | ×1 | √ | Gen2×1 | 2.0×4 | ×2 | ×2 | ×2 | √ | 5/12V | 5V | RS232RS485 |
 PoE UPS Base | √ | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | ×2 | √ | 5/12V | 7-36V | UPS |
 PoE Base | √ | ×1 | √ | 3.0×4 | ×2 | ×2 | ×2 | √ | 5/12V | 7-36V | ||
 Raspberry Pi official | ② | ×1 | √ | Gen2×1 | 2.0×4 | ×2 | ×2 | ×2 | √ | 12V | 12V | |
 Wireless base | ×1 | M.2 B / Mini-PCIe | 2.0×3 | ×1 | ×1 | √ | 5/12V | 5V or 7-36V | 5G/4G support RS485 CAN rail-mount | |||
 UPS Wireless base | ×1 | M.2 B | 2.0×3 | ×1 | ×1 | √ | 5/12V | 5V or 7-36V | With UPS 5G/4G support RS485 CAN rail-mount | |||
 NAS Mini Computer | ×2 | √ | M.2 M×2/ Mini-PCIe | 3.0×2 | ×2 | ×2 | √ | 5V | dual M.2 M KEY slots | |||
 5″ touch screen | ② | ×1 | √ | M.2 M | 2.0×4 | ×1 | ×2 | √ | 5/12V | 5V | ||
 7″ all-in-one | ×1 | M.2 M | 2.0×4 | used | ×1 | used | √ | 5/12V used | 7-36V | touch screen camera speaker | ||
 13.3″ all-in-one | ×1 | 2.0×2 | 12V | HD touch screen | ||||||||
 13.3″ Magic Mirror | ×1 | 2.0×2 | 12V | HD screen, Speech Assistant | ||||||||
| Note | ① USB 3.0 is equivalent to USB 3.2 Gen1 ② There's PoE header only on the Raspberry Pi official IO board without PoE circuit, that means additional PoE module is required for the official IO board to enable PoE feature. Unless otherwise specified, the PoE feature here stands for integrating 802.3af-compliant PoE circuit (5V/2.5A). | |||||||||||
Lieferumfang
- CM4-NANO-B x1
- 2*20PIN color-coded straight pinheader x1
1
2
Login