ESP32-S3 4.3inch Display Development Board, 800×480, Options For Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth
€39.26*
Currently out of stock
A confirmed delivery date is not currently available. Please ask us to check current availability.
Product information "ESP32-S3 4.3inch Display Development Board, 800×480, Options For Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi & Bluetooth"
Integrates RGB interface LCD and 5-point capacitive touch (optional)
ESP32-S3-LCD-4.3without touch control
ESP32-S3-Touch-LCD-4.3 with touch control
This product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 4.3inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications
- Equipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency
- Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE), with onboard antenna
- Built in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and 16MB Flash
- Onboard 4.3inch LCD display, 800×480 resolution, 65K color
- Supports 5-point capacitive touch control via I2C interface, with interrupt support (for touch version only)
- Onboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port
- Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
Excellent display performance, 160° viewing angle
Supports the expansion of multiple peripherals via Sensor, CAN, RS485, and I2C interfaces
for reference only, please refer to the Package Content for the detailed part list
- ESP32-S3N16R8 The SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash
- SGM2212-3.3 800mA low-noise LDO
- FSUSB42UMX for USB pins multiplexing
- Touch panel connector
- USB TO UART Type-C port
- USB Type-C port
- TJA1051T/3/1J CAN interface chip
- CH422G IO expansion chip
- BOOT button Press and hold while powering on for program burning
- RESET button
- MP3302DJ-LF-Z Screen backlight boost chip
- 4.3inch display panel connector
- TF card slot
- Sensor header
- CAN header
- I2C header
- RS485 header
- 3.7V single lithium battery PH2.0 header
- CAN terminal resistor selection
- RS485 terminal resistor selection
- CH343P USB to UART chip
- SP3485 RS485 transceiver chip
- CS8501 Lithium battery recharge manager
- Status Indicators PWR: Power supply indicatorCHG: Lithium battery charging indicatorDONE: Lithium battery charging completed indicator
ESP32-S3-LCD-4.3
ESP32-S3-Touch-LCD-4.3
| Model | Basic Parameters | LCD Parameters | Communication interface | Others | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MCU | Flash | PSRAM | Resolution | ViewingAngle | TouchType | CAN | RS485 | I2C | UART | Sensor | DigitalInput | DigitalOutput | Dimensions (mm) | |||
 ESP32-S3-Touch-LCD-4 Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 480 × 480 | 160° | capacitive | √ | √ | √ | - | - | - | - | without touch version: 76.54×74.66 (mm) with touch version: 84.2×84.2 (mm) | ||
 ESP32-S3-Touch-LCD-4.3B Standard Ver. / Case Ver. | ESP32-S3 | 16MB | 8MB | 800 × 480 | 160° | capacitive | √ | √ | √ | - | - | √ | √ | Standard version: 112.4×75.1 (mm) Case version: 116.3×79 (mm) | ||
 ESP32-S3 4.3″ LCD Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 800 × 480 | 160° | capacitive | √ | √ | √ | - | √ | - | - | 106.1×67.8 (mm) | ||
 ESP32-S3 5″ LCD Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 800 × 480 | 160° | capacitive | √ | √ | √ | - | - | √ | √ | 127.7×87.45 (mm) | ||
| ESP32-S3 5″ LCD (B) Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 1024 × 600 | 178° | capacitive | √ | √ | √ | - | - | √ | √ | 127.7×87.45 (mm) | ||
 ESP32-S3-Touch-LCD-7 Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 800 × 480 | 170° | capacitive | √ | √ | √ | √ | √ | - | - | without touch version: 165.72×97.60mm with touch version: 192.96×110.76mm | ||
 ESP32-S3-Touch-LCD-7B Without Touch / With Touch | ESP32-S3 | 16MB | 8MB | 1024 × 600 | 170° | capacitive | √ | √ | √ | √ | √ | - | - | without touch version: 165.72×97.60mm with touch version: 192.96×110.76mm | ||
Lieferumfang
ESP32-S3-LCD-4.3
- ESP32-S3-LCD-4.3 x1
- HY2.0 2P to 2PIN male cable 10cm ×2
- HY2.0 3P to 3PIN male cable 10cm ×1
- HY2.0 4P to 4PIN male cable 10cm ×1
- Standoff pack ×1
ESP32-S3-Touch-LCD-4.3
- ESP32-S3-Touch-LCD-4.3 x1
- HY2.0 2P to 2PIN male cable 10cm ×2
- HY2.0 3P to 3PIN male cable 10cm ×1
- HY2.0 4P to 4PIN male cable 10cm ×1
- Standoff pack ×1
Login