1.9inch Segment E-Paper Module, 91 Segments, I2C Bus, Ideal for Temperature and humidity meter, Humidifier, Digital Meter
€13.08*
Currently out of stock
A confirmed delivery date is not currently available. Please ask us to check current availability.
Product information "1.9inch Segment E-Paper Module, 91 Segments, I2C Bus, Ideal for Temperature and humidity meter, Humidifier, Digital Meter"
Support Partial Refresh, Low Power, Wide Viewing Angle, Paper-Like Displaying Without Electricity
Ideal for Temperature and Humidity meter, Humidifier, Digital Meter...
- Size
1.9″ - Segment
91 segments - Viewing Angle
>170° - Display Color
Black/White - Grey Scale
2
I2CDisplay Panel
E-paperExperience
Paper-likeEnvironment
Ambient Light RequiredDisplay Type
Passively Reflective- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- I2C interface, for connecting with controller boards like Raspberry Pi/Arduino/STM32, etc.
- Onboard MOS voltage translating circuit, compatible with 3.3V/5V MCUs
- Comes with development resources and manual(driver board schematic, examples for Raspberry Pi/Arduino/STM32)
| operating voltage | 3.3V/5V | grey scale | 2 |
|---|---|---|---|
| interface | I2C | Partial Refresh Time | 0.3s |
| outline dimensions | 51 × 34 mm | full refresh time | 2s |
| display size | 41.35 × 28.11 mm | refresh power | <5mW (typ.) |
| Segments | 91 | standby current | <0.01uA (almost none) |
| display color | Black/White | viewing angle | >170° |
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper. E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
For Use With Controller Boards Like Raspberry Pi/STM32/Arduino
| VCC | Power (3.3V / 5V input) |
|---|---|
| GND | Ground |
| SDA | I2C data input |
| SCL | I2CI clock input |
| RST | External reset, low active |
| BUSY | Busy status output pin (high level means busy) |
Suitable For Temperature and Humidity meter, Humidifier, Digital Meter...
* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.
Lieferumfang
- 1.9inch Segment e-Paper Module x1
- 6Pin Cable x1
Login